SeaSide420

Ichimoku + Daily-Candle_X + HULL-MA_X + MacD

Ichimoku_cloud + Daily-Candle_cross(DT) + HuLL-MovingAverage_cross + MacD
any timeframe, all indicators settings adjustable for fine tuning to pair/timeframe
Target Point and Stop Loss settings
set SL low to reduce repaint
Remove from Favorite Scripts Add to Favorite Scripts
//@version=2
// Any timeFrame ok but good on 15 minute & 60 minute , Ichimoku + Daily-Candle_cross(DT) + HULL-MA_cross + MacD combination 420 special blend
strategy("Ichimoku + Daily-Candle_X + HULL-MA_X + MacD", shorttitle="٩(̾●̮̮̃̾•̃̾)۶", overlay=true, default_qty_type=strategy.percent_of_equity, max_bars_back=720, default_qty_value=100, calc_on_order_fills= true, calc_on_every_tick=true, pyramiding=0)
keh=input(title="Double HullMA",type=integer,defval=14, minval=1)
dt = input(defval=0.0010, title="Decision Threshold (0.001)", type=float, step=0.0001)
SL = input(defval=-500.00, title="Stop Loss in $", type=float, step=1)
TP = input(defval=25000.00, title="Target Point in $", type=float, step=1)
ot=1
n2ma=2*wma(close,round(keh/2))
nma=wma(close,keh)
diff=n2ma-nma
sqn=round(sqrt(keh))
n2ma1=2*wma(close[1],round(keh/2))
nma1=wma(close[1],keh)
diff1=n2ma1-nma1
sqn1=round(sqrt(keh))
n1=wma(diff,sqn)
n2=wma(diff1,sqn)
b=n1>n2?lime:red
c=n1>n2?green:red
d=n1>n2?red:green
confidence=(security(tickerid, 'D', close)-security(tickerid, 'D', close[1]))/security(tickerid, 'D', close[1])
conversionPeriods = input(9, minval=1, title="Conversion Line Periods")
basePeriods = input(26, minval=1, title="Base Line Periods")
laggingSpan2Periods = input(52, minval=1, title="Lagging Span 2 Periods")
displacement = input(26, minval=1, title="Displacement")
donchian(len) => avg(lowest(len), highest(len))
conversionLine = donchian(conversionPeriods)
baseLine = donchian(basePeriods)
leadLine1 = avg(conversionLine, baseLine)
leadLine2 = donchian(laggingSpan2Periods)
LS=close, offset = -displacement
MACD_Length = input(9)
MACD_fastLength = input(12)
MACD_slowLength = input(26)
MACD = ema(close, MACD_fastLength) - ema(close, MACD_slowLength)
aMACD = ema(MACD, MACD_Length)
closelong = n1<n2 and close<n2 and confidence<dt or strategy.openprofit<SL or strategy.openprofit>TP
if (closelong)
    strategy.close("Long")
closeshort = n1>n2 and close>n2 and confidence>dt or strategy.openprofit<SL or strategy.openprofit>TP
if (closeshort)
    strategy.close("Short")
longCondition = n1>n2 and strategy.opentrades<ot and confidence>dt and close>n2 and leadLine1>leadLine2 and open<LS and MACD>aMACD
if (longCondition)
    strategy.entry("Long",strategy.long)
shortCondition = n1<n2 and strategy.opentrades<ot and confidence<dt and close<n2 and leadLine1<leadLine2 and open>LS and MACD<aMACD
if (shortCondition)
    strategy.entry("Short",strategy.short)//                         /L'-, 
//                               ,'-.           /MM . .             /  L '-, 
//     .                    _,--dMMMM\         /MMM  `..           /       '-, 
//     :             _,--,  )MMMMMMMMM),.      `QMM   ,<>         /_      '-,' 
//     ;     ___,--. \MM(    `-'   )M//MM\       `  ,',.;      .-'* ;     .' 
//     |     \MMMMMM) \MM\       ,dM//MMM/     ___ < ,; `.      )`--'    / 
//     |      \MM()M   MMM)__   /MM(/MP'  ___, \  \ `  `. `.   /__,    ,' 
//     |       MMMM/   MMMMMM( /MMMMP'__, \     | /      `. `-,_\     / 
//     |       MM     /MMM---' `--'_ \     |-'  |/         `./ .\----.___ 
//     |      /MM'   `--' __,-  \""   |-'  |_,               `.__) . .F. )-. 
//     |     `--'       \   \    |-'  |_,     _,-/            J . . . J-'-. `-., 
//     |         __  \`. |   |   |         \    / _           |. . . . \   `-.  F 
//     |   ___  /  \  | `|   '      __  \   |  /-'            F . . . . \     '` 
//     |   \  \ \  /  |        __  /  \  |  |,-'        __,- J . . . . . \ 
//     |    | /  |/     __,-  \  ) \  /  |_,-     __,--'     |. .__.----,' 
//     |    |/    ___     \    |'.  |/      __,--'           `.-;;;;;;;;;\ 
//     |     ___  \  \     |   |  `   __,--'                  /;;;;;;;;;;;;. 
//     |     \  \  |-'\    '    __,--'                       /;;;;;;;;;;;;;;\ 
// \   |      | /  |      __,--'                             `--;;/     \;-'\ 
//  \  |      |/    __,--'                                   /  /         \  \ 
//   \ |      __,--'                                        /  /           \  \ 
//    \|__,--'                                          _,-;M-K,           ,;-;\ 
//                                                     <;;;;;;;;           '-;;;; 
//a1=plot(n1,color=c)
//a2=plot(n2,color=c)
//plot(cross(n1, n2) ? n1 : na, style = circles, color=b, linewidth = 4)
//plot(cross(n1, n2) ? n1 : na, style = line, color=d, linewidth = 4)
//plot(conversionLine, color=#0496ff, title="Conversion Line")
//plot(baseLine, color=#991515, title="Base Line")
//plot(close, offset = -displacement, color=#459915, title="Lagging Span")
//p1=plot (leadLine1, offset = displacement, color=green,  title="Lead 1")
//p2=plot (leadLine2, offset = displacement, color=red,  title="Lead 2")
//fill(p1, p2, color = leadLine1 > leadLine2 ? green : red)
// remove the "//" from before the plot script if want to see the indicators on chart
@SeaSide420 I'm looking to add time rage from October 2018 to February 2019 to backtest. Can you please share what code i need to include so i can backtest just the past 6 months?
+3 Reply
@tttdiff,

//@version=3
// Any timeFrame ok but good on 15 minute & 60 minute , Ichimoku + Daily-Candle_cross(DT) + HULL-MA_cross + MacD combination 420 special blend
strategy("Ichimoku + Daily-Candle_X + HULL-MA_X + MacD", overlay=true, default_qty_type=strategy.percent_of_equity, max_bars_back=720, default_qty_value=100, calc_on_order_fills= true, calc_on_every_tick=true, pyramiding=0)
keh=input(title="Double HullMA",type=integer,defval=14, minval=1)
dt = input(defval=0.0010, title="Decision Threshold (0.001)", type=float, step=0.0001)
testStartYear = input(2018, "Backtest Start Year")
testStartMonth = input(1, "Backtest Start Month")
testStartDay = input(1, "Backtest Start Day")
testPeriodStart = timestamp(testStartYear,testStartMonth,testStartDay,00,00)

testStopYear = input(2021, "Backtest Stop Year")
testStopMonth = input(1, "Backtest Stop Month")
testStopDay = input(1, "Backtest Stop Day")
testPeriodStop = timestamp(testStopYear,testStopMonth,testStopDay,0,0)

testPeriod() =>
time >= testPeriodStart and time <= testPeriodStop ? true : false

ot=1
n2ma=2*wma(close,round(keh/2))
nma=wma(close,keh)
diff=n2ma-nma
sqn=round(sqrt(keh))
n2ma1=2*wma(close,round(keh/2))
nma1=wma(close,keh)
diff1=n2ma1-nma1
sqn1=round(sqrt(keh))
n1=wma(diff,sqn)
n2=wma(diff1,sqn)
b=n1>n2?lime:red
c=n1>n2?green:red
d=n1>n2?red:green
confidence=(close-security(tickerid, 'D', close))/security(tickerid, 'D', close)
conversionPeriods = input(9, minval=1, title="Conversion Line Periods")
basePeriods = input(26, minval=1, title="Base Line Periods")
laggingSpan2Periods = input(52, minval=1, title="Lagging Span 2 Periods")
displacement = input(26, minval=1, title="Displacement")
donchian(len) => avg(lowest(len), highest(len))
conversionLine = donchian(conversionPeriods)
baseLine = donchian(basePeriods)
leadLine1 = avg(conversionLine, baseLine)
leadLine2 = donchian(laggingSpan2Periods)
LS=close, offset = -displacement
MACD_Length = input(9)
MACD_fastLength = input(12)
MACD_slowLength = input(26)
MACD = ema(close, MACD_fastLength) - ema(close, MACD_slowLength)
aMACD = ema(MACD, MACD_Length)
closelong = n1<n2 and close<n2 and confidence<dt and testPeriod()
if (closelong)
strategy.close("Long")
closeshort = n1>n2 and close>n2 and confidence>dt and testPeriod()
if (closeshort)
strategy.close("Short")
longCondition = n1>n2 and strategy.opentrades<ot and confidence>dt and close>n2 and leadLine1>leadLine2 and open<LS and MACD>aMACD and testPeriod()
if (longCondition)
strategy.entry("Long",strategy.long)
shortCondition = n1<n2 and strategy.opentrades<ot and confidence<dt and close<n2 and leadLine1<leadLine2 and open>LS and MACD<aMACD and testPeriod()
if (shortCondition)
strategy.entry("Short",strategy.short)
Reply
DO NOT USE
+6 Reply
ok everyone, This strategy is old. it repaints, and mostly because of the daily candle cross part of it.
the script is open to see. Either suggest a fix to it, or move on.
I would delete this if i were able too. No one should use this script.
The strategy actually works fine as a MT4 robot, but here on tradingview there is repainting on the chart.
Why dont yall complain to tradingview to make a backtester that doesnt repaint, then i can bring you the win

or just use MT4 robot or API robot

0_o
+13 Reply
SeaSide420 SeaSide420
@SeaSide420, you know what really sux... somoone out there knows how to fix repainting, takes this and fixes it, then doesnt share....
Charting are joke anyway

I only trade with robots, which never paint anything, they simply enter or exit trades, which cannot be repainted
+2 Reply
mortdiggiddy SeaSide420
@SeaSide420, to fix the repainting, one line needs to be changed at line 22:

from:

confidence=(security(tickerid, 'D', close)-security(tickerid, 'D', close))/security(tickerid, 'D', close)

to:

confidence=(close-security(tickerid, 'D', close))/security(tickerid, 'D', close)

It's that simple. You were using the close of the current day which can be "seen ahead of time for historical data". What you need to do is use the current close of the day which is basically the close at any time. The previous close values marked with for the previous day are "already locked in".
+5 Reply
brad7502 mortdiggiddy
@mortdiggiddy, Are you sure this works? If you are right it's the greatest strategy of all time.
Reply
brad7502 mortdiggiddy
@mortdiggiddy, your wrong still repaints
Reply
@brad7502, how about using this?

confidence=(security(tickerid, '480', close)-security(tickerid, 'D', close))/security(tickerid, 'D', close)
+1 Reply

What is the best time frame to use it in Forex pairs? Because in 5 minutes it has a very good profitability but in 1 minute it has 100% profitability in almost all the pairs, which is incredible. What do you recommend?
Reply
Home Stock Screener Forex Screener Crypto Screener Economic Calendar How It Works Chart Features Pricing House Rules Moderators Website & Broker Solutions Widgets Charting Solutions Help Center Feature Request Blog & News FAQ Wiki Twitter
Profile Profile Settings Account and Billing TradingView Coins My Support Tickets Help Center Ideas Published Followers Following Private Messages Chat Sign Out